Longshine Technologie Europe GmbH LCS-GS8208-A 8-Port Gigabit Switch Webmanaged www.longshine.de
9 Installing Network Cables 1. Crossover or straight-through cable: All the ports on the switch support Auto-MDI/MDI-X functionality. Both straigh
10 Functional Description Jumbo Frame With Jumbo Frame supported, it is allowed for the switch to transport identical data in fewer frames. Hence he
11 Management guide Access the Switch This section instructs you how to enter and proceed the advanced management capability, which can be acces
12 Homepage After authentication procedure, the “SYSTEM Configuration” page shows up as the Homepage. You may click the hyperlinks on the left side
13 System The System window provides the switch information and allows users to configure the switch properties. Items Functions MAC Address T
14 Port This Port Configuration page shows the link status of each port and allows users to configure speed, flow control and Max frame size for eac
15 VLAN VLAN divides the network members into groups to reduce packets collisions and improve the network efficiency. The switch supports 802.1Q tag
16 PVID When the VLAN-enabled switch receives a tagged packet, the packet will be sent to the port’s default VLAN according to the PVID (port VLAN I
17 Aggregation/ Trunk Configuration To set up the Port trunk groups, put the ports number into the same Aggregation group. There are eight groups to
18 Quality of Service QoS enhances the communication quality by giving different precedence to classified packets. This switch provides port-based,
1 FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
19 Tag based QoS: The Tag based QoS decides packet priority according to the tags that adding on the packets. To configure Tag Based QoS config
20 DSCP mode QoS: The DSCP mode QoS gives packet priority by the DSCP information attaching on the incoming packets. To configure DSCP Based QoS
21 Mirror The Mirror function copies all the packets that are transmitted by the source port. Those copied packets will be delivered to the destinat
22 Storm Filter This “storm filter” page allows users to configure the rules for Storm Control, which limits the flow of broadcast and multicast
23 SNMP This device supports SNMP-management, which allows network administrators to monitor and configure this device with SNMP software. To allow
24 Discovery After installing series of our switches, the discovery management tool helps users to search and get access to those switches within t
25 Statistics Overview The Statistics Overview is provided for users to see the general transmitting and receiving status of each port. You may cl
26 Restart Restart: To restart the system, click the “Yes” button. The system restarts and shows the authentication window. Please fill in the use
27 Product Specifications Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3x full-duplex operation and flow control IEEE802.3ab 1000BASE-
28 Appendix- Command Line Interface Start-up and Terminal configuration To start-up the command line interface, please connect a PC COM port to th
2 Table of Contents UNPACKING INFORMATION...4 INTRODUCTION...
29 Command Hierarchy After logging in, press ? + <enter> to show the 9 command groups. System - System commands Console - Conso
30 Command Description The following session introduces the command structure of the command line interface. Command groups: System - System
31 UserName [<name>] Description: Set or show the user name. [<name>]: String of up to 16 characters (default: Show user name). System P
32 Port Commands Commands at Port level: Port Configuration [<portlist>] Port Mode [<portlist>] [<mode>] Port Flow Control [<po
33 Port Admin [<portlist>] [enable|disable] Description: Set or show the Admin for the port. [<portlist>] : Port list (default: All
34 VLAN Commands Commands at VLAN level: VLAN Configuration [<portlist>] VLAN Add <vidlist> [<portlist>] VLAN Delete <vidlist&g
35 VLAN Egress [<portlist>] [untagged|tagged] Description: Set or show the VLAN egress mode setting for the port. Egress untagged ports will s
36 Aggregation Commands Commands at Aggr level: Aggr Configuration Aggr Add <portlist> Aggr Delete <portlist> Aggr Lookup <portlist&g
37 QoS Commands Commands at QoS level: QoS Configuration [<portlist>] QoS Mode [<portlist>] [tag|port|diffserv] QoS Port [<portlis
38 QoS DiffServ [<dscpno>] [<class>] Description: Set or show the IP Differentiated Services mapping. [<dscpno>]: IP DSCP number,
3 PRODUCT SPECIFICATIONS ...27 APPENDIX- COMMAND LINE INTERFACE...
39 IP Commands Commands at IP level: IP Configuration IP Setup [<ipaddress> [<ipmask> [<ipgateway>]]] [<vid>] IP Web manage
40 SNMP Setup [enable|disable] Description: Activate or deactivate the SNMP. [enable|disable]: Enable/disable SNMP (default: Show SNMP mode). SNMP
4 Unpacking Information Thank you for purchasing the 8-port Gigabit Ethernet Web Smart Switch. Before you start, please verify that your package cont
5 Key Features l 8* fixed 10/100/1000Mbps Gigabit Ethernet ports for easy network connecting application. l Provide Auto-discovery Function for ea
6 LED Definition LED for the device: The switch provides a power LED for the device. LED Status Operation Steady Green The switch is powered
7 The Rear Panel The rear panel of the switch: Power Receptacle To be compatible with the electric service standards around the world, the sw
8 Installation This switch can be placed on your desktop directly, or mounted in a rack. Please refer to the instructions for installation. Before i
Kommentare zu diesen Handbüchern